Counter top RO water dispenser (Cold / Hot / Room Temp)

Model： HM-190
LED Hot water temp display.
5-stages RO filtration Inside.
Pump improves the efficiency of RO water production.
100% Factory tested ready for quick and reliable installation.
Prev Next Back

Product Description
Product Specification

Quality water

for Life

These units actually eliminate bacteria and cysts, as well as reduce 99% of most contaminants found in your water.
Convenience design for the simple installation, and you have an excellent way to make SOLE AQUA Quality Water a part of your family's life.

SEDIMENT FILTER

This Sediment Filter is melt blown with 100% pure POLYPROPYLENE microfibers.
High capacity filter removes Rust, Silt, Scale, Sediment, Dirt, Coarse Sand and Sand from water.
It's high Dirt-Holding capacity results in longer life.

UDF/GAC FILTER

The Granular Activated Carbon filter cartridge is made from high quality carbon.
Reduces chlorine, organic chemicals, unnatural tastes and odors and other chemicals found in tap water.

CTO CARBON FILTER

The Carbon Block CTO is made from high quality carbon in a "block" construction. The structural design provides a high chemical absorption rate.
Reduces chlorine, organic chemicals, unnatural tastes and odors and other chemicals found in tap water.

RO MEMBRANE

The semipermeable Membrane (ROM) element removes up to 99% of health-related contaminants.
This high rejection TFC type membrane can removes contaminants like Bacteria, Viruses, Pesticides, Ai, Pb, Cd, Hg, TDS including many other unhealthy contaminants.

POST CARBON

The post carbon filter is designed to improve taste, it is the final stage of any standard reverse osmosis system.
The inline filter made from high quality carbon, removes any residual impurities and odors from the tank, stabilizes the water taste quality then provides a finer conditioning of pure water.

Standard Accessories

or you can choose what you need.

Filter Housing Wrench

Connection Tube 1/4"

Drain Clamp 1/4"

Feed Water Ball Valve
Tube 1/4" x NPT 1/4"

Feed Water Adapter
1/2" x 1/2" x 1/4"

Water Dispenser RO System Diagram

Model	HM-190
System Capacity	Hot 1.4L / Cold 1.7L / Room 3.5L
Voltage	AC 110V / 220V 50/60Hz
Power	Heater 600W / Refrigeration 210W
Material	ABS Plated Front Panel、Plated Frame
Protection	Leakage Circuit Breaker, water level detector, Hot water locker, Leakage detector
Filtration	5-Stages RO Filtration Inside 1st Stage - 12" in-line PP 5 micron filter 2nd Stage - 12" in-line GAC carbon filter 3rd Stage - 12" in-line CTO carbon Block Filter 4th Stage - RO membrane 50GPD 5th Stage - 10" in-line post carbon cartridge
Feed Water Pressure	Minimum 10 psi
Feed Water Temperature	4 ~ 38℃ / 40 ~ 100℉
Feed Water pH	2.0 -11.0
System Dimensions	(W) 26 x (D) 52 x (H) 58 cm
System Package Dimensions	(W) 36 x (D) 62 x (H) 66 cm